Gravier pour Allée Gratuit — Tonnes & Coût (2026)
Calculateur de gravier pour allée carrossable : estimez tonnes et coût par type — gravier concassé, gravier roulé, grave ou granit décomposé.
Comment utiliser ce calculateur
- 1Measure the total length of your driveway in feet.
- 2Enter the driveway width — 10 to 12 feet for a single car, 20 to 24 feet for a double-wide driveway.
- 3Enter the gravel depth — 6 inches is standard for driveways, 8 to 10 inches for heavy vehicle traffic.
- 4Select your gravel type and click Calculate for cubic yards, tons, and an estimated cost range.
À propos de ce matériau
A gravel driveway is one of the most affordable and practical alternatives to poured concrete or asphalt. When properly installed with the correct materials and adequate depth, a gravel driveway can last 10 to 15 years with minimal maintenance. The best gravel driveway is built in three layers. The bottom layer (4 inches) uses large #3 or #4 stone (1.5 to 3 inches) for drainage and stability. The middle layer (4 inches) uses #57 stone (3/4 inch) as a transition. The top layer (2 to 4 inches) uses compactable stone like #8 or #411 that locks together to form a firm driving surface. Each layer must be spread and compacted separately. Crushed stone (#57 or #411) is the most popular driveway gravel because its angular edges lock together under compaction, creating a stable surface. Road base (also called crusher run or #21A) is a blend of crushed stone and stone dust that compacts into an extremely hard surface — it is the preferred choice for heavy-traffic driveways. Pea gravel looks attractive but shifts under tires and is not recommended as a primary driveway surface. Decomposed granite compacts well and provides a natural appearance, popular in the western United States. Driveway gravel costs $1 to $3 per square foot installed, depending on depth and material. A typical 12x50-foot single-car gravel driveway costs $600 to $1,800 for materials only. Professional installation with grading, fabric, and compaction adds $2 to $5 per square foot. Annual maintenance includes raking displaced stone back into ruts and adding a 1 to 2-inch top-up layer every 2 to 3 years.
Étapes suivantes :
Conseils de pose
- •Grade the driveway with a 2 to 3% slope away from the house for proper drainage — water pooling on gravel creates potholes.
- •Install geotextile landscape fabric over the graded subgrade to prevent stone from mixing with the soil below.
- •Spread and compact each layer separately — do not dump all the gravel at once.
- •Use a plate compactor or roller on each lift to maximize density and stability.
- •Install border edging (steel, aluminum, or timber) along both sides to prevent gravel migration into the yard.
- •Crown the driveway center slightly higher (1 to 2 inches) so water sheds to both edges.
Erreurs courantes à éviter
- Using pea gravel as the driving surface — its rounded shape does not compact and stones scatter under tires.
- Dumping gravel directly on topsoil without grading — organic soil decomposes and causes sinkholes and mud mixing.
- Applying only 2 to 3 inches of gravel — this is too thin for vehicle traffic and will rut through to the subgrade quickly.
- Skipping the fabric layer — without it, gravel sinks into soft soil within 1 to 2 years and you lose half your stone.
- Not compacting between layers — loose gravel shifts and develops ruts and potholes within weeks of use.
Questions fréquentes
Calculateurs associés
Calculateur Tiges d'Ancrage Gratuit — Quantité & Coût (2026)
Combien de tiges d'ancrage faut-il ? Calculateur gratuit pour tiges filetées type J et chimiques avec espacement standard de 1,80 m — total et répartition inclus.
Ouvrir le calculateur →Calculateur Bande d'Arase Gratuit — Rouleaux & m (2026)
Calculateur de bande d'arase : estimez les rouleaux de joint mousse par périmètre de fondation. Outil gratuit pour largeurs de 90 mm et 140 mm avec recouvrement.
Ouvrir le calculateur →Calculateur Lisse Basse Gratuit — Pièces & Mètres (2026)
Combien de bois traité pour la lisse basse ? Calculateur instantané pour sections de 45×95 mm et 45×145 mm — mètres linéaires et nombre de pièces.
Ouvrir le calculateur →Calculateur Béton Gratuit — m³, Sacs & Coût (2026)
Combien de béton faut-il ? Calculateur gratuit pour dalles, semelles et poteaux — donne les mètres cubes et le nombre de sacs avec facteur de perte.
Ouvrir le calculateur →